The keen-eyed will immediately spot a new feature assigned to three buttons in this weekend’s mode review. As can be seen in the mode map below, buttons B1 and B2 are marked CPI LOW and CPI HIGH, while B4 is set to CPI Default. These button assignments incorporate our new CPI-on-the-fly feature, which allows you to actively switch between three CPI settings, DEFAULT, LOW, and HIGH, each of which are set to any value between 100 and 5600. This is very useful when sniping at a distance, for example, when clicking on B1 will instantly drop the CPI to your low setting, (in my case I use 350), in order to line up your shot more accurately, then click on B2, (I have it set to 3200), to switch back to the high setting for rapid recon. The default setting is at 2000 for use in the barracks, but that too can be set to whatever value you prefer. These are all Special Buttons so if you have no need to use different CPI settings within the same application, you have no need to waste a button on it. They can also be assigned